Product Profibus DP / LWL T-Coupler - 2. generation

Profibus DP / LWL T-Coupler - 2. generation

RS485/PROFIBUS for zone 1/21
07-7311-97WP45.0

Benefits

  • Bridging of great distances
  • Noice-immune signal transmission
  • Galvanic isolation
  • Fiberview for fiber optic ring monitoring
Get a Quote

Marking

Ex II 2(1)G Ex db e [ib] IIC Gb
Ex I M2 Ex db e [ib] I Mb
Ex db e [ib] IIC Gb
Ex db e [ib] I Mb
Class I Zone 1 IIC
A/Ex d e [ib] IIC Gb


Fitting (17-1923-1122/0000):
Ex II (2) G / II (2) D
[Ex ib Gb] IIC
[Ex ib Db] IIIC


Optical waveguide, Transmitter (17-2114-0002):
Ex II 2 G / II 2 D
Ex ib op is IIC T4 Gb
Ex ib IIIC TX* °C Db


Optical waveguide, Receiver (17-2114-0003):
Ex II 2 G / II 2 D
Ex ib IIC T4 Gb
Ex ib IIIC TX* °C Db

Ambient Temperature

-25 °C to +60 °C at T4

Certification

Description

The PROFIBUS LWL - coupler reroutes the PROFIBUS from copper conductors to optical waveguides. The coupler is a passive bus participant and are suitable for hazardous areas of zone 1 and 21. In plants, the PROFIBUS LWL - coupler allows the bridging of great distance with PROFINET without noice interference. The electronics for the signal conversion are accomodated in the flameproof MODEX enclosure. Transmitter and receiver for the LWL-coupler are intrinsically safe headed. The intrinsically safe control transmitter and receiver of the electronic system guarantee that the transmitter rate does not go beyond maximum value limits.

Technical Data

Protection class At least IP 20
Structure Clip-on enclosure to TH 35
Dimensions see data sheet
Material High-quality thermoplastic
Storage temperature -40 °C to +70 °C
Weight 600 g
Display

LED Green: Operation indicator (ON)

BA:
LED green flashing: Bus activity
LED red: no communication  

FV1 and FV2:
LED Red: No connection  
LED Red/green=yellow: Light output borderline  
LED Green: Connection OK
LED green or yellow flashing: Data reception
 
Declaration:
FV = Fiberview
BA = BUS activity   
 

Voltage Supply voltage: DC 20 V to DC 30 V
Power dissipation max. 2,0W
Bus interface Bus input/output:
2-wire remote bus with screw terminals
LWL input/output:
FSMA Optical fibre plug-in connectors or
ST Optical fibre plug-in connectors

Other

Manuals/Operating Instructions/Guides

Declarations

Data Sheets

Brochures