| Degree of protection | Function module with junction box and actuating element: Up to IP66/IP67 |
|---|---|
| Electrical parameters |
See operational instruction of the respective function module |
| Cable gland clamping range |
Acc. to the manufacturer’s specifications of the cable gland (M16×1.5: 6–10 mm) |
| Mounting | See assembly and installation on page 5 of the operatinal instructions |
| Rated torque | Module terminals 0.4 – 0.7 Nm |
| Weight | Max. approx. 333 g, depending on the configuration.* |
Type
07-3324-5**0/****, 07-3354-51*0/****, 07-3364-51*0/****,
07-3364-52*0/****, 07-3364-57*0/****, 07-3364-58*0/****,
07-3374-5D*0/****
ATEX:
Ex II 2G Ex db eb IIC T6 Gb
Ex II 2G Ex tb IIIC T80 °C Db
IECEx:
Ex db eb IIC T6 Gb
Ex tb IIIC T80 °C Db
Type
07-3354-54*0/****, 07-3364-55*0/****, 07-3364-56*0/****
ATEX:
Ex II 2G Ex db ia IIC T6 Gb
Ex II 2G Ex ia tb IIIC T80 °C Db
IECEx:
Ex db eb IIC T6 Gb
Ex ia tb IIIC T80 °C Db
Specific Conditions of Use:
refer to page 4 of the operating instructions
The panelmounted module with junction box type 07-33*4-5**0/**** intended for use in hazardous areas Zone 1 and 21 as stationary equipment mounted by means of an actuator on a wall of an enclosure or a panel to indicate and switch non-intrinsically safe or intrinsically safe electrical circuits. The connection is established by means of terminals or an optionally provided connection cable.
The panelmounted module with junction box may optionally be provided with one of the corresponding accessories: protective collar, locking device, shield holder and marking clip.