We’ve transformed our packaging approach partnering with Hildebrandt AG with measurable results:
-Reduced packaging systems from 18 to just 3 standardized solutions
-Cut storage space needs by 90% (from 60 pallet locations to only 9)
-Introduced 100% recyclable packaging materials
-Eliminated plastic adhesive tape with automatic-bottom cartons
-Added reusable components to support a circular economy
-Replaced PE foam with sustainable membrane packaging that safely protects products up to 35 kg
Additional improvements include:
-UPS drop-test certified packaging (DIN EN 22248)
-Biodegradable filling materials
-Paper delivery-note bags instead of plastic
-Corrugated cardboard replacing plastic blister packs
Innovative Special Membrane and 100% Recyclable Packaging
BARTEC therefore set new standards in the protective packaging sector with its innovative membrane packaging, which was implemented as part of “Project Green” in Bad Mergentheim, Germany.
The new special membrane packaging replaced the previously used foam packaging. It consists of an outer carton, two membrane pads with film, and perforated corrugated cardboard combs, which enclose the packaged goods tightly and hold them in place gently. Two additional inserts protect against possible damage. “This special outer packaging not only creates more space in the warehouse but also offers special protection against any impact and vibration for sensitive shipping goods weighing up to 35 kg thanks to floating transportation between two cushions. At the same time, BARTEC focuses on increasing recyclability and reusability within its packaging systems. This is because the environmentally friendly special membrane packaging is reusable and can be integrated into the paper and cardboard recycling cycle,” says Markus Noe, Shipping Manager at BARTEC in Bad Mergentheim.
The reduction in packaging volume may contribute to lower transportation and storage requirements, supporting BARTEC’s efforts to improve resource efficiency throughout the logistics process. A flat packaging unit requiring minimal storage space can be transformed into a three-dimensional membrane special packaging solution in just a few simple steps.
A product like HMI Polaris with its specific characteristics in terms of weight, dimensions, and value, had never before been transported in membrane packaging. A drop test carried out according to the relevant standards confirmed the durability of the new packaging solution and we achieved DIN EN 22248 (UPS specification) drop-test certification for membrane special packaging.
The specific design and material composition (cardboard and film) of the membrane cushioning and outer packaging, along with an additional insert made of the same material, increased transport safety for the HMI Polaris products.
Positive impact: changeover reduces cost and storage volume
The introduction of the innovative special membrane packaging has resulted in numerous advantages and efficiency gains for BARTEC. The packaging changeover not only means a drastic reduction from 15 different packaging systems to just three systems in Bad Mergentheim, but also leads to a reduction in storage space.
The cost savings associated with the special membrane packaging are the result of various factors, including the reduction in packaging materials required and the reduction in process costs in the areas of procurement, storage and shipping. The short procurement times and fast handling of special membrane packaging help to increase efficiency and ensure that our packaging process runs smoothly.
“Our mission goes beyond improving internal processes. We want to make a contribution to a sustainable future through intelligent packaging solutions,” explains Markus Noe. “Overall, the switch to special membrane packaging means a holistic approach to improving our processes, cost efficiency, and environmental footprint.”
Packaging alternatives
In addition to the new special membrane packaging, we are also focusing on sustainable and efficient packaging alternatives in other areas.
For example, BARTEC now uses cartons with automatic bottoms and self-adhesive closures that require neither adhesive tape nor dispensers. This not only simplifies the sealing and opening process, but also helps to reduce waste and costs.
Another focus is on on recyclable and biodegradable materials where technically appropriate. The filling material is now biodegradable. Delivery note bags made of plastic are being replaced by paper bags, and monowell packaging round off the “Project Green” concept which helps reduce packaging waste and supports more resource-efficient operational processes.
New packaging for line bushing and switches
Furthermore, we have also recently changed the packaging of our line bushing and switches from a plastic blister solution to a corrugated cardboard (mono flute) one, which is completely recyclable and environmentally friendly. This innovative solution aims to protect our products during the logistics phases so that they can reach their final destinations in the best possible conditions. On the other hand, this new packaging reduces its environmental impact by using 100% recyclable materials manufactured using minimal impact on energy consumption and natural resources.
We share our commitment with our customers, employees and shareholders. We believe resource-efficient and recyclable solutions are an important aspect of long-term business resilience and customer expectations.
“As a worldwide leader in explosion protection, customers expect from us innovation from all sides: productwise of course, but also in terms of green and sustainable solutions, when possible,” highlights Simon Dyhringer, BARTEC Product Manager, Electrical Safety System (BU ESS) – EX components.
The new packaging solutions deliver significant environmental and operational benefits. Storage requirements have been reduced by 90%, reducing warehouse space requirements and supporting more efficient transport and storage processes.
All packaging materials are 100% recyclable, with several components also being reusable, supporting a more sustainable and supporting a more circular approach to packaging management. The use of automatic-bottom cartons further improves packing efficiency and productivity compared to conventional FEFCO 0201 cartons. In addition, the solution provides enhanced durability and product protection, reducing the risk of transport damage, product waste, and replacement shipments.





